Welcome to Shenzhen Deren Manufacturing Co.Ltd
15814001449
Hotline&Wechat

Products

Contact Us

You are here:Home >> Products >> Industrial Blades... >> Optical cutting blade...

Optical cutting blade

Optical fiber cutting blade


    DRMFG fiber cutting blade:
    1. DR fine tungsten steel, HRA ≥ 92.5
    2. The blade can rotate 12 to the transfer
    3. The average cutting life of each knife is about 3,000 times
    4. Cut angle <0.5 degrees
    5, 400 times the size of the full inspection of the microscope of the microscope
    6. Stable quality, export to many countries.
    7. Made in ten years to serve the world.

    optical firber cutting blade


    Product Features:

    Cutting angle stable
    Extension of cutting life
    Easy to replace blade
    Low temperature cutting is normal

    光纖切割刀片,optical firber cutting blade
    There are many failure reasons for optical fiber cutting and melting. 
    The common factors are:

    1. An impurities sticky on the blade or fiber;

    2. The cutting angle is not vertical, reinstall and debug;

    3. The blade is too far away, and the depth of cutting is insufficient. You need to reinstall it.

    4. Naked fiber coating layer is not peeled off cleanly.
    Please submit your drawing and requirement details, we will contact you as soon as possible!

    *

    *

    *

    *

Related products